Category Archives: Hardware

HW

Hardware, UNIX, Varia

DIY 13W3 to VGA(D-SUB) adapter

Leave a comment

While waiting for my Octane2 to arrive, I started preparations and made myself a 13W3 to DSUB Adapter.

There are plenty of adapters on the market, but most of them are either:

  • wrong way (to use 13W3 monitor with VGA Video card)
  • SUN-specific (some of them work with older SGI machines, but due to wrong routing of a couple signals, those do not work with newer machines like Octane)
  • There are (but difficult to find) SGI-specific adapters with only A1,A2,A3 signals routed.

So, what to do – there are usually few options:

  • Buy SUN adapter, and modify it to work (this usually involves dissecting the molded plug and rerouting some cables inside).
  • Buy a 13W3 -> BNC adapter, along with BNC -> VGA (that’s the best solution if you have monitor with BNC).
  • Make your own :)

Being a DIY guy, I decided to sacrifice some cheap old VGA cable I found in the box, bought a couple of 13W3 plugs with mini-BNC’s and started soldering. I was actually surprised I could buy 13W3 plugs, sockets and those mini-BNC’s with no problem at all (I did have to ask the clerk for more because the boxes in the store were empty – they had a bunch in stock – if I recall, 100 JPY for each mini-BNC + 300 JPY for the plug).


The operation is fairly simple:


  1. Strip off the D-SUB cable on one end – if it’s molded be careful not to cut yourself – there will probably be metal shielding which really likes to cut your fingertips :P (which hurts A LOT).
  2. Find out which cables are for R,G,B and their shielding – even my cheap cable had them clearly separated each with it’s own shielding (if yours doesn’t – throw it away and buy another one – you won’t get good picture without each color properly shielded), Red had pink color, Blue was Blue, and Green was white – so finding out what is what wasn’t hard either.
  3. Put BNC protective caps first and strip off the shielding from each of those 3 cables. My cable had foil with outer plastic wrapping on each.
  4. Make sure you have the caps – otherwise you will end up desoldering and probably melting the cable.
  5. Do you really have the caps on ?
  6. Solder the signal cables into 13W3 mini-BNC’s, then wrap the shielding around nicely and solder into each BNC outer casing,
  7. You may need to file the shielding solder nice and round so that cap has snug fit – if you do it well, it will fit all the way with a little click at the end.

I didn’t buy the plastic enclosure yet, looking at dimensions of my plug, any DB25 sized should work.

My small advice – DO NOT insert mini-BNC’s into the plug (I was tempted and this made it a bit harder, also you can’t remove it once it’s in place), solder them while loose.

Use third hand – if you do put mini-BNC’s into the plug – they rotate which just makes it harder.

At every step, make sure you didn’t melt signal’s isolation and there is no short between any of the pins.

Once you’re done, verify the cable:

  • A1 (RED) signal should lead to pin 1 (top left) on the DSUB.
  • A1 (RED) shielding should lead to pin 6 (middle row left) on the DSUB.
  • A2 (GREEN) signal should lead to pin 2 (top 2nd from the left) on the DSUB.
  • A2 (GREEN) shielding should lead to pin 7 (middle row 2nd from the left) on the DSUB.
  • A3 (BLUE) signal should lead to pin 3 (top 3rd from the left) on the DSUB.
  • A3 (BLUE) shielding should lead to pin 8 (middle row 3rd from the left) on the DSUB.


That’s all – 3 shielded cables should to the trick.

In addition, I would also recommend soldering cable’s outer shielding into the metal casing of the plug. (If you don’t – it will probably work, but you will end up with some interference.)

If you fancy (or if you monitor doesn’t support Sync-On-Green), you may need to solder Sync signals into respective ports (I didn’t need to, and this has not been confirmed to work):

Pin 3 – C. Sync / Gnd goes to pin 10 on DSUB

Pin 4 – H. Sync goes to pin 13 on DSUB

Pin 5 – V. Sync goes to pin 14 on DSUB


Some pictures below:

13W3 plugs:

Male plug: this is what goes on your cable.

Note order of BNC: from the left (Blue)A3, (Green)A2, (Red)A1

plug_13w3_numbers2.JPG

Female socket – this is what your SGI Workstation already has.

Note order of BNC: from the left (Red)A1, Green(A2), Blue(A3)

socket_13w3_numbers.JPG


Mini-BNC: this is what goes into your plug assembly – you can see the inner soldering point. Please also note the latch – once you insert into the assembly it’s permanent.

plug_bnc_back.JPG

And the front

plug_bnc_front.JPG

This is how the protective cap looks like – put it on the signal cable BEFORE soldering, and then after filing the outer solder a bit – push to fit – it should click, there’s no need to solder the cap together with the BNC.

socket_bnc_back_cover.JPG

The below is the MALE part – this is what your Workstation already has.

socket_bnc_front.JPG


And this is how it looks when finished (here with protective cap off)


bnc_cap_closeup.JPG

Here ready to be closed and used.

done_soldering_bnc_with_caps.JPG

All, Hardware, UNIX, Varia

Flashing and hacking the android phone for Japanese Softbank network.

84 Comments

[en]
So, i went to Google Developer Day 2009 last tuesday and got free HTC Magic GDD2009 phone – limited edition.
It’s very cool toy, has everything i need, but as usual here, MMS/Mail does not work when using normal cellphone SIM card.

The Story:

Here, in Japan, people use E-mails to communicate (more popular than SMS), but these are not ‘real’ emails – these are MMS’s converted to emails on the fly by provider.
So, by sending email to addres xx@softbank.ne.jp, their server will find who is recipient and convert it to MMS, sending to this person.
Vice-versa, by sending email from phone, it actually is MMS that you send, and provider will convert it to e-mail outside the network.

The way MMS receiving works: special SMS comes to the phone, it contains first 1024 bytes of message and some data instructing it to download the rest – this remaining part is being downloaded via standard HTTP protocol, but this is when problem starts – Softbank blocks HTTP User-Agent of unknown phones (not being sold by them).

Another (and the most annoying) problem i encountered, is the android device itself, the edition i have, does not support sending MMS at all.

Solutions:

Step 1:

Make backup of your current device (you can skip it if you’re too lazy or confident ;-) ):

Please follow these instructions: http://android-dls.com/wiki/index.php?title=Magic_Rooting

(You can download fastboot from HTC page given in step 2).

You just need to download Magic modified recovery image,

http://www.droiddeveloper.com/hrbuilds/recovery-new.img.zip

unzip it, copy to device and boot your device using it:

adb push recovery-new.img /sdcard/recovery-new.img
adb shell sync

Then, once you have the file on SD card, reboot your android, and while it starts keep “BACK” and “POWER” pressed – android will enter fastboot mode, then type:

fastboot boot recovery-new.img

Your android will run this recovery image which allows you few things, like update from sdcard, make backup etc.

Choose the option to backup nandroid.
It will place backup of your current device onto the SD card – might be worth keeping :-).

YOU DO NOT need to ‘root the magic’ or do any other steps from this instructions – these steps are for other purposes, not applicable here.

—

Step 2:

Making android support MMS (if your provider does not block user agent this is the only and final step):

This will flash your device to the same version as Google IO event, you get few features like Voice synthesis (voice search and voice dial), Amazon MP3 access – these are not present in Japanese version.
But, the drawback is – You will not have Japanese language support anymore.

First, make sure you really need to enable MMS, go to Messaging application, start typing, and press menu, if you DO NOT have options lile ‘add subject’, ‘attach’ – then you DO need it.

–

Flash it using these instructions from HTC website: http://www.htc.com/www/support/android/google-io-device.html

You DO NOT need worry that instructions is for Google IO edition and not GDDC09 – these phones are in fact different but there are ways around it.

I recommend using fastboot method (its not at all hard),

You will need to downlaod fastboot binary (available at HTC), and 2 of these images: Radio Image and System Image.

Follow instructions for Radio Image installation, most likely your device will boot after it completes but you will get permanent android starting logo,
please have your USB cable connected and adb showing logging – you will see that it tries to boot all over again – THIS IS OK – no need to panic.

Place radio image onto your card by typing:

adb push <radio-image-package>.zip /sdcard/update.zip
adb shell sync

Boot into recovery mode by holding HOME while it reboots, Then choose ALT+s on the screen, next HOME+BACK, device should reboot, it might not start at this point by just showing you android logo – this is ok, no need to panic…

Once you have radio package downloaded and flashed , time to flash it with system image – this is little tricky:

Push the image onto SD card:
adb push <system-image-package>.zip /sdcard/update.zip
adb shell sync
Boot into Fastboot (BACK+POWER while you start it) – MAKE NOTE OF ‘hboot’ version – you will need it very shortly.

You can safely try to flash system image, but it will fail due to incompatible HBOOT version (they require 1.33.3004, and you have probably 1.33.3005).
No need to worry here, we can make it happen :-).

So, what you need to do, is to UNPACK your system image to a folder, edit the file android-info.txt, change the require version-bootloader to your hboot version (1.33.3005 most likely), save it, and compress all the files in this directory into new zip file (all of them need to be in the ‘root’ of zipfile).

So, now you have compatible system image that will work well on your device, try flashing it now, DO NOT FORGET to select options to clean userdata and cache – this is required, without it, your device will boot only to android logo and keep hanging there.

—

Step 3:

Modifying User-Agent string in the MMS client (this *MAY* be enough to complete only this step and it might as well make your device support MMS’s – i have done all steps though):
(GGDC09 version has MMS disabled, and i am not sure whether just changing MMS app is enough to enable this).

Geeky version:

Download android source, follow instructions to compile it, apply this patch:

--- packages/apps/Mms/src/com/android/mms/transaction/HttpUtils.java  2009-06-12 23:56:28.000000000 +0900
+++ packages/apps/Mms/src/com/android/mms/transaction/HttpUtils.java  2009-06-12 23:47:20.000000000 +0900
@@ -220,7 +220,7 @@
 
     private static AndroidHttpClient createHttpClient() {
         AndroidHttpClient client
-                = AndroidHttpClient.newInstance("Android-Mms/0.1");
+                = AndroidHttpClient.newInstance("SoftBank/1.0/705NK/NKJ002/SN001 Android-Mms/0.1 Profile/MIDP-2.0 Configuration/CLDC-1.1");
         HttpParams params = client.getParams();
         HttpProtocolParams.setContentCharset(params, "UTF-8");
         return client;

(It will only change your User-Agent string reported to MMS gateway, will not touch the one in web browser).

Compile the source again, and install new Mms app using adb:

adb install -r ./out/target/product/generic/system/app/Mms.apk

Lazy version:

Download this file, and install using adb:

adb install -r Mms.apk

Do not forget to configure your APN (you will find instructions and passwords on the internet), remember NOT TO set apn type to “mms” – didn’t work for me this way.

All the files you need, are also mirrored Here:https://kubatyszko.com/filez/

Useful links:

Rooting HTC Magic – creating backup

HTC Google IO device support page

Android source

Further work: change more of android source, to have nice settings under MMS app, to edit UserAgent :-D.

Enjoy :-)

——-

UPDATE!!!

Thanks to Roberto Jung Drebes , now i know that there’s no need to flash GGDC09 with anything to get MMS working, all it takes is to use my MMS.app (or compile your own) – just the way i suspected.

Also, he found that setting apn type as ‘mms’ – doesn’t work unless you already have other apn with type ‘default’ – this way it works very well. Good way to ensure you don’t end up with huge phone bill due to data transfer…

[/en]

[pl]

Niedawno uczestniczyłem w Google Developer day 2009 w Yokohama, i dostałem za darmo telefon HTC Magic z Google Android – edycja limitowama.
Bardzo fajne i ciekawe urządzonko, ma wszystko czego potrzebuję, ale niestety jak to zwykle w japonii bywa, nie działają w nim MMS’y gdy używam zwykłej karty Sim z mojej komórki.

Historia:

Tutaj, w Japonii, używa się e-maili zamiast SMS, ale to nie są “prawdziwe” maile – to tylko MMS’y ukryte pod postacią emaili i konwertowane w locie przez operatora.
Więc, wysyłając email na adres xx@softbank.ne.jp, serwer skonwertuje go automatycznie do MMS i wyśle do odbiorcy,
i odwrotnie, wysyłając e-mail z telefonu, w efekcie wyślemy MMS’, a serwer skonwertuje go w locie to e-maila i wyśle na swiat.

Odbieranie MMS działa tak: przychodzi specjalnie skonstruowany SMS, zawiera pierwsze 1024 bajty wiadomośći i oprócz tego informacje dla telefonu jak pobrać resztę – poprzez zwykłe HTTP, i tutaj zaczyna się problem, Softbank(moj operator w Japonii) blokuje telefony inne niż sprzedawane przez nich.

Jakby tego bylo mało – oprogramowanie w moim telefonie miało całkowicie wyłączoną obsługę MMS.

Rozwiązanie:

Krok 1:

Robimy kopię zapasową urządzenia (możesz pominąć krok jak jesteś leniwy lub pewny że wszystko się uda ;-) ):

Podążaj za instrukcją na tej stronie:http://android-dls.com/wiki/index.php?title=Magic_Rooting

(Fastboot możesz pobrać ze strony HTC wymienionej w punkcie 2).

W tym kroku jedynie musisz pobrać obraz ‘recovery image’,

http://www.droiddeveloper.com/hrbuilds/recovery-new.img.zip

rozpakować, skopiować do telefonu uzywając:

adb push recovery-new.img /sdcard/recovery-new.img
adb shell sync

Kiedy już plik będzie skopiowany, uruchom ponownie telefon, i w czasie startu trzymaj BACK i POWER wciśnięte – android uruchomi się w trybie fastboot, wpisz:

fastboot boot recovery-new.img

Android uruchomi się z tego obrazu, który pozwoli ci między innymi zrobic backup wszystkiego do karty SD.

Wybierz opcję ‘nandroid backup’ – pliki zostaną zapisane na karcie SD.

NIE MA potrzeby robienia innych krókow z tej strony “root the magic”, one są potrzebne do innych celów, tutaj je pomijamy.
—

Krok 2:

Jak sprawić aby android obsługiwał MMS (jeżeli twój operator nie blokuje nie-swoich telefonow – to jest jedyny i ostatni krok):

W tym kroku wymienisz całkowicie oprogramowanie urządzenia, ja użylem oprogramowania do urządzenia rozdawanego na Google IO, dzięki temu mam dostęp to kilku funkcji niedostępnych w normalnej wersji, takich jak polecenia i wybieranie głosowe, Amazon MP3 itp.
Niestety jest też i zła strona – to oprogramowanie nie ma obsługi jezyka japońskiego.

Najpierw, upewnij się czy twój android pozwala na wysyłanie MMS, otwórz aplikację Messaging, wpisz tekst, wciśnij menu, jeżeli NIE MASZ opcji “add subject”, “attach” – znaczy że android ma zablokowame MMS.

–

Podążaj za instrukcją ze strony HTC: http://www.htc.com/www/support/android/google-io-device.html

Nie przejmuj się tym co piszą ze oprogramowanie nie będzie kompatybilne itp. (częściowo mają rację – urządzenia różnią się, ale to żaden problem).

Ja polecam uzyć metody fastboot (nie takie trudne),

Musisz pobrać program ‘fastboot’ z ich strony i 2 obrazy: Radio Image i System Image.

Zgodnie z instruckjś, zainstaluj Radio Image – prawdopodobnie, twój telefon po restarcie nie wystartuje poprawnie, będzie widoczne logo android ale nic wieęcej (w adb logcat będzie widać że próbuje startować co chwilę) – nie ma co panikować, to normalne.

Wgraj obraz Radio Image na kartę SD poleceniem:

adb push <radio-image-package>.zip /sdcard/update.zip
adb shell sync

wejdz w tryb Recovery przytrzymując HOME podczas startu, potem wybierz opcję ALT+s na ekranie, późśniej HOME+BACK, urządzenie powinno się zrestartować – nie panikuj jeżeli się nie uruchomi.

Jak juz masz wgrany Radio Image – czas na System Image:

Wgraj obraz na kartę SD:

adb push <system-image-package>.zip /sdcard/update.zip
adb shell sync

Wejdź w tryb fastboot (BACK+POWER podczas restartu) – ZAPAMIETAJ wersję ‘hboot’ – będzie ci potrzebna.

Mozesz spróbować wgrać system image już teraz, ale dostaniesz błąd że wersja nie pasuje do twojej wersji hboot (wymagana 1.33.3004, ty masz pewnie 1.33.3005).
Żaden problem – mozemy to obejść :-) .

Co należy zrobić – rozpakować System Image do folderu, znaleźć plik android-info.txt i zmienić wartość opcji ‘require version-bootloader’ podstawiając tam wersję hboot która odczytałeś przy starcie fastboot.
Następnie spakować zawartość folderu do nowego pliku zip, wgrać ten system image na kartę SD.

Więc, już teraz masz wszystko gotowe, spróbuj wgrać ten obraz, NIE ZAPOMNIJ żeby wybrać opcję ‘clean userdata and cache’ – to jest wymagane, bez tego, dostaniesz logo android na ekranie i nic więcej.

fastboot update .zip -w

—

Krok 3:

(Jeżeli twój operator blokuje nie-swoje telefony):

Musimy zmodyfikować klienta MMS żeby przedstawial sie w sposób bardziej lubiany przez operatora (Jest niewielka szansa ze ten krok rozwiąże twój problem w całości – nie jestem pewny czy wgranie nowej aplikacji MMS odblokuje wysyłanie czy nie – ja przeszedłem przez wszystkie 3 kroki):

Wersja hardkorowa:

Pobierz źrodło android ze strony google, skompiluj, i zainstaluj ten patch:

--- packages/apps/Mms/src/com/android/mms/transaction/HttpUtils.java  2009-06-12 23:56:28.000000000 +0900
+++ packages/apps/Mms/src/com/android/mms/transaction/HttpUtils.java  2009-06-12 23:47:20.000000000 +0900
@@ -220,7 +220,7 @@
 
     private static AndroidHttpClient createHttpClient() {
         AndroidHttpClient client
-                = AndroidHttpClient.newInstance("Android-Mms/0.1");
+                = AndroidHttpClient.newInstance("SoftBank/1.0/705NK/NKJ002/SN001 Android-Mms/0.1 Profile/MIDP-2.0 Configuration/CLDC-1.1");
         HttpParams params = client.getParams();
         HttpProtocolParams.setContentCharset(params, "UTF-8");
         return client;

(Ten patch zmeni tylko UserAgent w kliencie MMS, nie zmieni przegladarki WWW).

Skompiluj źrodło jeszcze raz (jedynie aplikacja MMS zostanie przekompilowana), i zainstaluj swieżą aplikację Mms do androida poleceniem:

adb install -r ./out/target/product/generic/system/app/Mms.apk

Wersja dla leniwych:

Pobierz Ten plik i zainstaluj uzywając adb:

adb install -r Mms.apk

Nie zapomnij skonfigurować APN do MMS, jako ‘apn type’ NIE WPISUJ ‘mms’ – to nie działa.

Wszystkie pliki jakie są potrzebne wgrałem na swoja strone tutaj:
https://kubatyszko.com/filez/

Linki:

Rooting HTC Magic – creating backup

HTC Google IO device support page

Android source

Co dalej: zmienić źrodło jeszcze bardziej – żeby miec ładne menu z edycją UserAgent w aplikacji Mms :-D.

Powodzenia :-)
[/pl]

All, Hardware, Japan

Protekcja rynku

Leave a comment

[pl]
Chyba nie ma innego kraju w ktorym tak ostra bylaby protekcja wewnetrznego rynku.

Kupilem niedawno sluchawki bluetooth Sony DR-BT22, i chcialem je podlaczyc do ipoda,
juz same sluchawki nielatwo znalezc, moze z 90% modeli to takie wiszace na szyi a ja takich nie chce, chce takie z palakiem na gorze a znalezienie takich to juz niemaly wyczyn (sa moze z 3-4 modele, wczesniej mialem plantronics pulsar ale to tandeta – rozpadly sie po 4 miesiacach). W koncu znalazlem sklep, wczesniej sprawdzilem ktory adapter do ipoda dziala, oczywiscie na stronie producenta pisza ze dziala tylko z adapterami sony, a do ipoda jest tylko jeden: TMR-BT8iP.
Wiec pytam w sklepie czy jest – nie ma, pytam dlaczego – nie wiadomo, nie ma bo nie ma (a taich samych adapterow do sony walkmana jest w kazdym tyle ze mozna sie nimi przykryc…. – dlaczego taka roznica – moze dlatego ze to ipod czyli konkurencja).
Wiec nie ma wyjscia, musialem kupic jakis inny czyli ryzykowac ze moze nie dzialac , panowie w sklepie pouczyli mnie ze ten ktory wybralem (jakis maxell) nie zadziala ale drugi (sanwa mm-btad10) owszem, sprobowalismy no i dziala.

Pozniej sprawdzilem dokladnie w sieci – adaptera TMR-BT8iP mimo ze jest w ofercie po prostu nigdzie NIE MA i wcale sie nie dziwie, ipoda trzeba zwalczac, tak sie tutaj robi biznes…

I na ipodach takie dzialania sie nie koncza, np. oplaty za samochody uzywane, np. starsze niz 3 lata sa tak wyregulowane zeby przekroczyly cene samochodu czyli zmuszaly do zakupu nowego…
[/pl]

[en]
I think there’s no other country in the world like japan where local-market protection would be so strong.
Not long ago i bought bluetooth headphones: Sony DR-BT22 and wanted to connect them to my ipod,
wasn’t even easy to find shop which has phones, 90% of available models are those hanging on the back of neck and i don’t like those, i want those overhead ones. Some time ago i had one more from plantronics – the pulsar but this was crap – fell apart after 4-5 months. Finally i found a shop, before going there i checked which bluetooth adapters will work with phones and ipod, of course manufacturers webpage states that only sony-made adapters work – and they make only one – TMR-BT8iP. So i’m asking for the adapter – they don’t have, asking why – don’t know, they just don’t have, and what’s bad – similar bluetooth adapter for sony’s walkman is present in big quantities…
Why they have walkman adapters and not ipod ones – competition, everyone knows they compete with apple… And simply not having adapters is easy way to fight it…
So i was left with no choice, had to buy some other adapter risking it might not work, guys in the shop said the one i chose (maxell) wouldn’t work but other one (sanwa mm-btad10) should, we tried and all works fine.

Later i checked on the web, adapter TMR-BT8iP despite being offered by Sony IS NOT AVAILABLE anywhere in Japan, and i’m not even surprised, that’s how they do business here – by not having certain products…

And it’s not over with just ipod vs. walkman, even with cars, fees for used one (ie. more than 3 yrs old) are so big to make it totally impossible to own one and to force oneself to buy new car…
[/en]

All, Hardware, UNIX, Varia

Przenosiny

Leave a comment

[pl]Przenosze wlasnie bloga na nowy serwer wynajety w prawdziwej serwerowni we francji i przy okazji uaktualniam oprogramowanie do najnowszej wersji.
Jesli widzisz tego posta to znaczy ze odbierasz strone z nowego nadajnika :-)
[/pl]

[en]
Right now i am moving my blog to new server rented in real datacenter in france and in the meantime doing upgrade to new version of software.
If you see this post it means you get webpage from the new site :-)
[/en]